Tag Archives | Masculine Birthday Card

Bear Hugs Birthday: Slider Card

Bear Hugs Birthday

Welcome back!  Today’s share is a slider card we made at my last workshop. One attendee asked if we could make a slider card and so we did. The last slider card was with the Sale-A-Bration Honeycomb Happiness Stamp Set and can be found HERE.  I love this Bear Hugs Stamp Set! When I first saw it in the Stampin’ Up! Occasions Catalog the possibilities kept flowing in my head. This stamp set can be used for a masculine, feminine and children’s card for any occasion. This slider card was made with my son-in-law in mind for his birthday which we celebrated on Friday.

Bear Hugs Card

Instructions for the Bear Hugs Birthday Slider Card:

CARD STOCK and DIMENSIONS

  1. Cut a 10″ x 7″ card base from Whisper White Card Stock and score it at 5″
  2. Cut one 4″ x 6″ piece and one 6″ x 2″ piece of Pool Party Card Stock.
  3. Cut a 6″ x 1-1/2″ piece of Wild Wasabi Card Stock.
  4.  A 3″ x 3″ piece of Chocolate Chip (for bears), a 5″ x 1-1/2″ piece of Tangelo Twist (for fish) , a 1″ x 1″ piece of Hello Honey (for honey-pot) and a 6” x 2″ piece of Whisper White (for flowers & greeting)

STAMPING

All stamps are from the Stampin’ Up! Bear Hugs Stamp Set

Bear Hugs Detail

  1. Stamp the large and small bear in VersaMark on Chocolate Chip Card Stock and sprinkle on White Embossing Powder and melt it with a Heat Tool.
  2. Stamp 5 fish in Memento Black Ink on the Tangelo Twist Card Stock.
  3. Stamp the honey pot in Memento Black Ink on the Hello Honey Card Stock.
  4.  Stamp three group of flowers and the greeting in Memento Black Ink on the Whisper White.

 

CUTTING

  1. With the BIG Shot and the Bear Hugs Framelits cut out the Papa and Baby Bear, the honey-pot, the fish and the flowers.
  2. On the Wild Wasabi piece punch the slider opening with the Window Punch.
  3. Tear the 6″ x 2″ piece of Pool Party along one edge. Sponge the torn edge with a Sponge Dauber and Pool Party Ink.
  4. Hand-cut a cloud shape around the greeting.

 

PUTTING IT ALL TOGETHER

Bear Hugs Lil' Bear Detail

  • Adhere the torn pirce of the Pool Party about halfway down the Pool Party base making sure you placed a fish jumping out of this “wave.”
  • For the Wild Wasabi Layer follow:

THE GENERAL DIRECTIONS ON

“HOW TO MAKE A SLIDER CARD” GO HERE

  • Place three fish on a piece of Baker’s Twine. Use Glue Dots to   adhere them.
  • Attach the Baker’s Twine to the bear hands using two Chocolate  Chip Candy Dot Brads.
  • Place and attach all the pieces as shown above.

Bear Hugs Sentiment

PLEASE NOTE: I’m in the process of redesigning my blog. I thought it was time for a new look.  I’ll post when I can this month, but it may not be as frequent as I would like…

 

Embrace the day!

Siggy 2

0

Stampin’ Up!: Dapper Dad Birthday Card

I don’t know about you, but I’m always on the look-out for great masculine stamp sets. Stampin’ Up!’s Dapper Dad Stamp Set is not only masculine, but has fun images with fun patterns such as argyle and hounds-tooth!  Love to use this set with the new Stampin’ Up! color Smokey Slate.  See if you don’t agree??

DSC_1107

Card base is a piece of 8-1/2″ x 5-1/2” scored at 4-1/4″  The Smokey Slate layer measures 5″ x 3-3/4″ and is DRY EMBOSSED* with the Stampin’ Up! Chevron Embossing Folder. The Basic Black label was cut using the Apothecary Accents Framelits and HEAT EMBOSSED* with the Happy Birthday greeting with White Embossing Powder. The great patterned shoe was stamped in Smokey Slate Ink on Whisper White Card Stock and hand-cut. I love the Smokey Slate, because it’s a neutral, and coordinates with a wide range of colors from Pink Pirouette to Basic Black.

 

images-7

Thanks for stopping by. Come back soon to see my, “With All My Heart Week”.  Cross my heart it’s a week of heart projects for you to make, give or keep just in time for Valentine’s Day!

 

 

Remember to eat, sleep, stamp and create!

 

Hugs,

Diane Caro, Stampin' Up! Demonstrator

 

*EXPLAINING EMBOSSING:

 

DRY EMBOSSING: Dry embossing is simply placing a texture or embossing folder through a die cutting machine such as The BIG Shot or similar.  Dry embossing creates a raised surface on the card stock or paper.

 

HEAT EMBOSSING: Heat embossing is when an image is stamped using VersaMark or pigment ink, then before the ink is dry, embossing powder is poured over the image and it’s heated until the embossing powder is melted into a raised glossy finish.

black-swirl-divider-md

 

0

Sweet Cake: Masculine Card

Oh, the joys of making a masculine card! I find making cards for males a real challenge, so when I do come up with a design I like to share it.  No bows on this card, but I did manage to sneak in a little, “Bling!” Shh…

 

Stampin' Up Sweet Cake Birthday Card,Sweet Cake Masculine

 

Supplies & Sizes for this card:

Sweet Cake Stamp Set

4-1/4″ x 11″ piece of Pacific Point Card Stock and scored at 5-1/2″

5″ x 3-3/4″ piece of Crumb Cake Card Stock

2-1/2″ x 3-1/4″ piece of Berry Blossoms Designer Series Paper

Scrap piece of Very Vanilla Card Stock for stamping

4-1/2″  piece of Pacific Point Grosgrain Ribbon

Stripped and Square Lattice Embossing Folders

Ticket Corner Punch

Dazzling Details

Real Red, Pacific Point, River Rock and Early Espresso Markers

Three Chocolate Chip Brads

 

Start by sending the top half of Crumb Cake through the Big Shot, with the Stripped Embossing Folder.

 

Then on the bottom half, send the piece of Crumb Cake through the Big Shot again, but this time use the Square Lattice Embossing Folder.

 

Ink up the stamp from the Sweet Cake Stamp Set with the River Rock, Pacific Point, Real Red and Early Espresso Markers as shown. Stamp, “Happy Birthday” in Pacific Point.  Cut out the stamped image and add Dazzling Details on the frosting and Cherry Cobbler Dazzling Details on the cherry and heart. Place it aside to dry.

 

Take the Designer Series Paper, Crumb Cake and the card base and with the Ticket Punch, punch all corners.

 

Wrap the piece of Pacific Point Ribbon around the Crumb Cake.

 

Piece three holes for brad placement and add the Brads.

 

Adhere all layers as shown. Make sure your Dazzling Details is dry!

 

And there you have it!  Remember, when it comes to making masculine cards make it simple and textured. These are the key ingredients

 

If you want the SWEET CAKE STAMP SET order it before it goes away on April 30.

 

Thanks for looking!

 

Stampin’ Hugs,

Diane Caro, Stampin' Up! Demonstrator

0

Stampin’ Up! Guitar Birthday Card: For John…

Today is my almost son-in-law John's birthday. John is a Special Ed teacher in the Bronx & owner of Miller's Green, a landscaping business. So, John has little free time. When he does have a little time, he can be found listening to music and  playing his guitars. I tell you, he's a keeper!

 

For John's birthday I knew I wanted to do a card in the shape of a guitar. It was quite an easy shape to draw and cut along one edge of the card. First, I started with Soft Suede Card Stock and as I was playing around with the other shapes and colors,  I knew the Soft Suede wasn't doing it for me. Sorry, Soft Suede! I then took a piece of More Mustard Card Stock and liked that better immediately, but it looked flat. I really have this thing about flat looking cards. Then I got this ideas and here's what I came up with:

 

 

 

 

 

Here's what I initially sketched out and then cut it out of Soft Suede. I started with a half sheet of card stock, 8-1/2" x 5-1/2" scored at 4-1/4".  

 

 

 

 

I then decided to use More Mustard card stock with a Soft Suede 2" circle, Basic Black 1-3/4" circle and all the other guitar parts are from Cajun Craze. The Cajun Craze piece that looks like a lima bean is the pick guard and the other rectangular piece is the neck of the guitar, cut off at the top of the card.  

 

Even after I cut the More Mustard guitar shape, as I mentioned earlier, it looked flat to me, so that's when I decided to cut 3/4" x 5-1/2" strips.

 

I distressed the edges of each strip with Cajun Craze Ink and a Sponge Dauber and then I pulled out my Background Woodgrain Stamp. Love it! I inked it up with Cajun Craze Ink and laid each distressed strip on the top to stamp it up! (haha)

 

 

 

 

The result was realistic looking wood strips. This part was was so much fun and pretty rewarding. Once all seven strips were distressed and inked, I placed a piece of an Adhesive Sheet on the front of the card and I carefully laid each strip down butting each other. This is a great technique for you to use whenever you want to add a wood grain look to your projects.

 

For the bridge pins I used 6 Silver Brads and for the guitar strings I first tried some of my beading wire, which didn't cooperate at all. I decided to use some retired Stampin' Up! Silver Elastic Cording I have, It worked like a dream and resembles guitar wire more then the wire did. Go figure… I cut other pieces Of Cajun Craze Card Stock to use as the saddle and bridge. Here's a detailed view of the brads and silver elastic cording.

 

Now, here's the deal, if you would like the template to this guitar, for your personal or class planner, all you have to do is leave me a comment and EMAIL ME and you'll receive a FREE PDF Guitar Template in your mailbox.

 

I certainly hope you make this card for the guitar player in your life.

 

This one's for you John!  

Blessed Birthday Wishes xox 

Diane Caro, Stampin' Up! Demonstrator

41

Open Sea: Masculine Birthday Card…

Friday, November 25, was my cousin’s husband Ron’s birthday. This is the card I made for him. It’s pretty straight forward and I’m still in love with this Open Sea stamp set.

Open Sea Masculine Birthday Card

Card base is a 5-1/2″ x 8-1/2″, scored at 4-1/4″ piece of Early Espresso.

A 5″ x 3-3/4″  piece of Very Vanilla was cut for the layer. I ran this throught the Big Shot with the Stripes Embossing Folder.

 

On a separate peices of Very Vanilla I stamped the map (love it!) in VersaMark and sprinkled it with Gold Embossing Powder and melted it with a Heat Tool.

 

I cut the map out with my Circle Scissor Plus and mounted it on a 2-3/8″ Circle Punch out.

 

I stamped, “Happy Birthday” in Chocolate Chip Ink. I trimmed around it and layered it on a piece of Crumb Cake card stock.

 

I layered the card together, but not before wrapping a piece of Chocolate Chip Scallop Dot Ribbon and bow around it.

 

Thanks for visiting and GET THOSE HOLIDAY CARDS MADE!!!!!! There’s still time if you place an on-line order by clicking on my shop Stampin’ Up! Button on my sidebar.

 

Stampin’ Hugs,

Diane Caro, Stampin' Up! Demonstrator

0

Plane & Simple Happy Birthday Uncle Hector & CarolMarie…

Plane & Simple Header
Today is my Uncle’s birthday as well as my Goddaughter, CarolMarie. Here’s the card I made for my uncle and later this week I’ll share the card I made for my Goddaughter. Masculine birthday cards can be a challenge and that’s why I love this Stampin’ Up!’s Plane and Simple stamp set.

Plane & Simple Happy Birthday Card

 

Plane & Simple BIrthday Card Map Detail

 

The map part of this card was done by copying the map sheet from the Newsprint Designer Series Paper on to copy paper and hand-colored it in. For the water I used a “Pointillist” technique I used when I worked as a staff artist at the Wall Street Journal. Over the dots I used water-color pencils. I colored in the land with brown and olive green pencils. I then tore the top edge of the paper and mounted it on a piece of Old Olive Card Stock which was torn as well.

 

 

For the clouds, I used this technique with Whisper White Craft Ink over the Pool Party sky.

 

I made cloud templates out of a piece of card stock by cutting small circles resembling cloud puffs as shown below. Yes, you have to hand cut these as a circle punch will not work because it will leave a concave form. These templates work as a mask except along the edges where I used a circular motion with my Dauber. The area underneath the template will remain the Pool Party. I randomly moved the template down and from side to side  and repeated the circular motion technique along the edge. When I painted years ago sometimes I used stencils in a similar manner. I hope this is clear. I’m hoping to do videos as soon as I get up enough nerve.

DSC_0527

 

The plane was stamped in Soft Suede on Very Vanilla Card Stock and cut out.

 

The Happy Birthday was stamped in Not Quite Navy Ink and I trimmed it close in a banner shape and swallow tailed the end.

Uncle Hector

CarolMarie

 

 

 

 

 

 

 

 

A very Happy Birthday to two of my favorite people.

 

Stampin’ & Birthday Hugs,

Siggy 2

0

Countryside Masculine Birthday Card…

This is the card I made for my brother John. It’s pretty straightforward and notice I used the new Pewter Embossing Powder once again! I just can’t help myself…

Countryside Masculine Birthday Card

Card Stock Sizes:

Baja Breeze            5-1/2″ x 8-1/2″ scored at 4-1/4″

Whisper White    5″ x 3-3/4″

Soft Suede              4-3/4″ x 3-1/2″

 

On a scrap piece of Whisper White, stamp the truck form the countryside stampe set in VersaMark and emboss the image with the Pewter Embossing Powder and a Heat Tool. Stamp the truck image again on another on a sheet of print paper and cut it out. This is going to be your mask for coloring in the sky. Place some Dotto re-positionable adhesive on the back of the mask and layer it over the embossed card image.

Countryside Truck Image & Mask

With Pastels and a Sp0onge Dauber, color in the sky. When finished remove the mask.

Countryside Coloring Sky

Use a combination of Markers and Watercolor Pencils to color in the Embossed truck. Carefully tear around the truck, tearing the card stock toward you. Use your opposite tearing hand, as a guide, so not to tear into the Embossed image.

Countryside Masculine Birthday Card Detail

On the right hand corner of the Soft Suede, stamp the Birthday Greeting form the Petite Pairs stamp set in VersaMark and White Embossing Powder.

 

Layer the card as shown in the photo.

 

Now, you have a completed masculine birthday card to give to that special male in your life! Don’t forget to check out my other masculine cards HERE.

 

As ever, thanks for stopping by!

 

Stampin’ Hugs.

Siggy 2

0

Happiness Is A Journey: John’s Birthday Card…

Happiness is a journey, for sure! Today our family is filled with happiness as we celebrate my husband John, my brother John and my nephew Cody’s birthdays. In our house we actually have a 9/27 club! This is the card I made for my husband John. When he was young, he had a train set and really and truly loved it. So, this one’s for you John!

Happiness is a Journey Masculine Birthday Card

Here’s what I did for John’s Birthday Card.

 

Cut:

Basic Black card stock         10″ x 7″ scored at 5″ (card base)

3-3/4″ x1-3/4″  (layer for greeting)

Basic Gray card stock           4-1/2″ x 6-1/2″ (card layer)

Whisper White card stock  3-1/2″ x 1-1/2″ (greeting)

Glossy White card stock     4″ x 3″

 

I love this stamp sett, because it works so well with the “Soot Technique,” which is exactly what I used for the image.

 

To do the Soot Technique, here’s what you need:

Glossy Card Stock

Candle (A tapered candles works faster then a pillar candle)

Tweezers

Rubber Stamp

Matte Spray Sealer

 

Please do this technique using caution. Over a sink is a good place in case paper catches on fire, although I have never had it happen.

 

Here’s What to Do:

 

1.  Light the candle.

 

2.  Using tweezers hold the 4″ x 3″ piece of Glossy card stock’s edge and touch the flame with the card stock, Happiness is a Journet Detail glossy side to the flame, and keep moving card stock through the flame until soot accumulates on card stock. Experiment how dark you want the card stock to become.

 

3.   Hold the soot covered card stock  by the edge and place with the glossy soot side up on the counter taking care not to touch the soot.

 

4.  Use an un-inked rubber stamp and stamp image onto the soot covered card stock. The stamp will pull off the soot and the image will appear. If you’re not happy with the image repeat the process.

 

5.  Spray lightly with a matte sealer.

 

When the sealer is dry, tear the edges of the Glossy card stock. If you want the white edge tear the edge toward you. I think it frames out the soot divinely!

 

For John’s Happy Birthday Greeting I used the Perfectly Penned stamp set, VersaMark Ink and the new Pewter Embossing Powder. I’m hooked on this pewter powder.

 

The card was layered a shown.

 

Birthday Hippo A BIG HAPPY BIRTHDAY to the 9/27 club, especially my better half. xox

 

 

0

Origami Shirt Birthday Card…

Hi, Stampers!

 

So many of you have asked for another Origami Shirt Card, so here goes. For this card I decided to make it a birthday card, but you can make it just in time for Father’s Day. I chose a plaid shirt, because plaid reminds me of my husband’s choice of shirts for the summer.

Origami Shirt Birthday Card

 

Card Directions:

 

Cut a 5-1/2″ x 8-1/2″ pice of Poppy Parade Card Stock and score it at 4-1/4″

 

Cut a 3-3/4″ x 5″ piece of Whisper White Card Stock

 

Cut a 3-3/4″ x 3-1/4″ of Designer Series Paper for the top portion and a 3-3/4″ x 1-1/4″ of another pattern of Designer Series Paper for the bottom portion. Both of these pieces are layered over the Whisper White

Origami Shirt Birthday Card Detail

I cut a simple tie shape as shown and made an origami shirt.Directions for the origami shirt are HERE  For my shirt I used the plaid sheet from the Pawsitively Prints II Designer Series Paper. I love this pack of paper and seem to use it a lot lately. Doesn’t red and blue look fabulous together?

 

On a 3″ x 1-1/4″ piece of Poppy Red Card Stock I stamped Happy Birthday from the Bring On the Cake Stamp Set in Versa Mark Ink and embossed it with White Embossing Powder.

 

I hope you enjoy making this origami shirt as much as I do. Play around with different patterns and colors. Instead of a tie, try a bow tie or buttons going up the front of the  shirt like I did in my first origami shirt. If you’d like to order the Pawsitively Prints II Paper click HERE

 

Thanks for stopping by,

Siggy 2

 

(PS)_______________________________________

Featuring Next Time Button-001

Using Kraft Packing Paper to make a Heart Flag…

0

Plane & Simple Masculine Birthday Card…

Hi, Stampers and Paper-Artists!

 

I don’t know about you, but I always have trouble coming up with masculine cards. I’m happy to say, in Stampin’ Up!’s new Summer Mini Catalog, there are great masculine stamp sets and designer series papers which you can start ordering May 1. Until then, Stampin’ Up! has the Plane & SImple Stamp Set, which is one of my favorites for Father’s Day or Masculine Birthday Cards.  I do love the look of this card, because of the old fashioned images. See if you agree?

Plane & Simple

Here’s a “Plain and Simple” recipe for this card:

 

Stamp Set: Plane and Simple

 

Ink: Not Quite Navy (plane and “Happy Birthday”)

Crumb Cake (border image)

Chocolate Chip (goggles)

 

Card-Stock: Not Quite Navy (card base) 5-1/2″ x 8-1/2″ scored at 4-1/2″

Very Vanilla 5-1/2″ x 3-3/4″ (first layer), 2-3/4″ x 2″ (plane)

2-1/8″ x 1-3/8″ (goggles)

Crumb Cake 3″ x 2-1/4″ (plane), 2-3/8″ x 1-5/8″ (goggles)

 

You have until April 30, to order the Plane & Simple Stamp Set or anything else you want from the Occasions Mini Catalog.. Don’t miss out.

 

Thanks for stopping by.

 

Stampin’ Hugs,

Siggy 2

0

Powered by WordPress. Designed by WooThemes